Mechanical Structure of Hot Air Stenter

  • The Hot Air Stenter is mainly used to make the weaving machine. Generally, the hot air stenter uses the heat transfer oil to heat the air in the setting machine, and then heats the fabric. When the fabric reaches a certain temperature and remains for a certain period of time, the structure of the fabric changes to achieve the purpose of setting. The double-point lining coater is the main equipment for processing high-grade low-elastic linings and thin non-woven linings. It mainly consists of several parts such as retort, slurry coating, dust coating, up and down suction, drying room, cooling and winding, pneumatic and electrical control.

    The Hot Air Stenter mainly consists of a agriculture device, a preheating zone, a high-temperature ambience zone, a cooling area and a bolt absolution device. The agriculture accessory is to accomplish the bolt erect to anniversary added beneath a assertive astriction or a assertive airy accompaniment including a astriction frame, a character detector, a assimilation device, an over-feed device, an automated ascendancy device, edge-detector and so on, which can accomplish it calmly access the machine.

    Then, the bolt is acrimonious to a assertive temperature through the top hot area to abstain the algid basic bolt anon entering the high-temperature ambience area and affecting the ambience temperature.

    The preheated bolt enters the high-temperature ambience area (with beef heating and electric heating device) so that the bolt is analogously acrimonious for a assertive time, afterwards extensive the abstraction requirements, again access the cooling area to air-conditioned rapidly, and finally, the bolt is anesthetized through the bolt roller and the bolt bottomward frame.

    The operation of the fabric in the machine is driven by a clip chain or pin-plate or clip chain. A static eliminator should be installed at the fabric outlet, or a steam vent and a metal screen should be installed in front of the fabric roller to spray a proper amount of steam on the cloth surface to appropriately increase the moisture regain of the fabric in order to reduce the generation of static electricity. More inforamtion https://www.hotairstenter.com/product/hot-air-stenter.html